A NSF registered Belt Dressing Spray which is designed to increase transmitted power and decrease energy costs by significantly reducing belt
slippage which in turn extends belt life. Exceptionally tacky properties Non-toxic.
Conditions belts Improves belt life and performance Improves belt performance Reduces slippage Aids transmission efficiency.
Reduces energy costs Does not affect the tensile strength of the belt.
Improves profitability Water Resistant Effective even in damp conditions Special 'all angle valve' allows the can to operate when held in any direction,
even upside down Easily directed spray. Safe for use where incidental contact with food may occur.
Temperature range -50ºC to 100ºC Chlorofluorocarbon (CFC) free aerosol Economical in use 300ml aerosol
Shake can well before use. Spray evenly onto the moving belt. A sudden drop in noise indicates that belt has stopped slipping.
Test compatibility with painted or coated surfaces and rubbers prior to application.
If you have any queries then please contact us.
Premium quality mineral oil. Lithium thickened lubricating grease suitable for multi-purpose applications. Contains extreme pressure and oxidation resistant additives to reduce wear and improve grease performance to extend component life.
Areas of use
Calibre is packed in sealed cartridges preventing contamination prior to use and fits most standard grease guns and as such may be used on bearings, rams, slide mechanisms and tracks to prevent metal to metal contact thus eliminating wear or break-down
Calibre has high temperature and pressure stability and will withstand temperature from –30oc to +130oc. Calibre is durable and resistant to attack from salt and fresh water and meets the requirements of most major bearing manufacturers specifications.
Instabond is designed to quickly repair cracks, leaks, fractures, casting & corrosion porosity in metal (ferrous & non ferrous) plastic, concrete and asbestos clad piping carrying water, oil, steam and most gases & solvents. Instabond is an emergency repair & cures in less than 10 mins saving costly down time.
Areas of use
Instabond has good temperature, pressure & chemical resistance and is quick & easy to use. It has been developed with a new knitted aramid fibre to ease repairs on corner joints, elbows & other shaped fittings. Ideal for permanent repairs requiring max strength & security in the chemical. Power & manufacturing industries.
DIRECTIONS: 1. Shut down pipes & hoses before repair. Clean & abrade lightly to the area to be repaired. 2. To activate the bandage soak in warm fresh or salt water for 10 secs. & squash in the hand whilst submerged. Curing begins immediately upon opening the package therefore it must applied quickly to the repair area. The entire bandage must be used. FOR DAMANGED & CRACKED PIPES:- Wrap the bandage very firmly around the damaged area extending 50mm beyond either side of the repair. Continue to apply pressure to the bandage by wetting the outside of the bandage & moulding in direction of the wrap until the bandage begins to set. The bandage hardens in 10 mins & is fully cured within 1 hr. FOR REPAIRING LEAKS & BLOW HOLES: Cut off 75mm of bandage & force into hole. Wrap bandage very firmly around damaged area extending 50mm beyond either side of repair. Continue to apply pressure to bandage by wetting the outside of the bandage & moulding in direction of the wrap until the bandage begins to set. The bandage hardens in 10 mins & is fully cured within 1 hr.
Available in 2"x60" & 3" x 160" rolls
Description Powerful fast acting formula. Water soluble-simply wash off with water. Low viscosity ensures quick penetration. Low odour, no choking fumes.
Application : Powerful graffiti remover suitable for removing graffiti from brick, stone and concretes. Not suitable for use on plastics, paints and other solvent sensitive surfaces .
Directions Spray onto graffiti. Allow sufficient time to penetrate. Wash off with plenty of clean water. Ensure surface is dry should re-application be necessary. FOR PROFESSIONAL USE ONLY
Other sizes may be available on request. Please contact us if you have any queries.
MASK: Eradicates offensives odours on land fill sites, Refuse shutes & Tips Variety of uses can be atomised or used from a bucket. Any bad smells are eliminated immediateley.
Long lasting: in PEARDROP / VANILLA / BIO-X / NEUTRALE REOSAN..
MASK is fully Biodegradeable, and does not harm Bug levels in traps and sewage works. Description Neutralises offensive odours from offal dumps. Controls sewage farm odours without impairing the natural enzyme action. Sweetens and freshens drains and settling tanks.
Food grade ingredients ensure low toxicity and safety in use. Safe yet effective for nursing home use. Application For refuse tips, dustbins, sewage farms, offal treatment plants etc. Also to eliminate offensive odours from geriatric and incontinent patient care. For general use spray affected area with solution of product in water.
Always spray at source of odour. May be drip fed into sewage. Will not effect working of septic tanks.
Directions General deodorising: Add Mask to cleaning solutions at 1 part to 80 parts of solution. Spray neat on refuse dumps, garbage and offal dumps. Dilute 1 part to 10 parts water for use in fogging equipment.
Use everywhere for a clean long lasting fragrance.
5 / 25 / 205 /IBC
PRICE LISTED IS FOR 5 Litres
For protection against liquid splash and molten metal, e.g. use when grinding, fettling and sandblasting.
Black poly-carbonate brow-guard and chin guard.
Supplied complete with 20cm (8") poly-carbonate visor.
Other types may be available on request. Please contact us if you have any queries
HDC-Quest is a blend of anionic, non-ionic, amphoteric detergents, surfactants and sequestering agents combined to produce a powerful water based degreaser and cleanser with the mildness to cope with more delicate operations and be safe to use.
Areas of use
HDC-Quest is extremely effective for the removal of heavy deposits of grease, fat, wax, oil, mildew, nicotine, road film and general soiling.
HDC-Quest is a genuine multi purpose cleaner, being ideal for use in the food industry for removing stubborn deposits of grease, fat, carbon etc found on bakery equipment.
HDC-Quest is totally safe to use on most surfaces not affected by water such as paintwork, plastic, vinyl, aluminium, stainless steel, ceramics, wood, carpets, upholstery and most soft furnishings.
HDC-Quest is a fully biodegradable product and is non toxic, non flammable and solvent free. HDC-Quest may be used for heavy duty applications such as degreasing heavy industrial machinery as well as for stain removal from soft furnishings or fabrics and is effective at dilutions is excess of 100:1.
HDC-Quest is completely water-soluble and will instantly emulsify soils and greases on contact.
Other quantities may be available. Please contact us if you have any queries.