Exodus is a high impact, concentrated blend of acid and inhibitors designed to clear blocked or slow running drains without the inconvenience of excavation or rodding.
AREAS OF USE
Exodus quickly attacks and dissolves all types of organic waste matters such as grease, hair waste food, rags, tissue paper and even limescale build up that can and all too often does accumulate in drains, sinks, toilets, grease traps and other waste disposal pipes. Exodus will also relieve blockages caused by seasonal variations e.g. ice in winter and leaves in autumn.
Exodus eliminates the need for costly excavation and personal contamination if rodding out should be deemed necessary. Exodus works by chemical action, dissolving all forms of blockages to a mobile state. Exodus then degrades and will not harm septic tank activity. Exodus is safe on ceramic, metal and plastic surfaces, although precautions should be taken against the effects of heating in confined applications. Exodus is a high impact, concentrated blend of acid and inhibitors designed to clear blocked or slow running drains without the inconvenience of excavation or rodding.
Instabond is designed to quickly repair cracks, leaks, fractures, casting & corrosion porosity in metal (ferrous & non ferrous) plastic, concrete and asbestos clad piping carrying water, oil, steam and most gases & solvents. Instabond is an emergency repair & cures in less than 10 mins saving costly down time.
Areas of use
Instabond has good temperature, pressure & chemical resistance and is quick & easy to use. It has been developed with a new knitted aramid fibre to ease repairs on corner joints, elbows & other shaped fittings. Ideal for permanent repairs requiring max strength & security in the chemical. Power & manufacturing industries.
DIRECTIONS: 1. Shut down pipes & hoses before repair. Clean & abrade lightly to the area to be repaired. 2. To activate the bandage soak in warm fresh or salt water for 10 secs. & squash in the hand whilst submerged. Curing begins immediately upon opening the package therefore it must applied quickly to the repair area. The entire bandage must be used. FOR DAMANGED & CRACKED PIPES:- Wrap the bandage very firmly around the damaged area extending 50mm beyond either side of the repair. Continue to apply pressure to the bandage by wetting the outside of the bandage & moulding in direction of the wrap until the bandage begins to set. The bandage hardens in 10 mins & is fully cured within 1 hr. FOR REPAIRING LEAKS & BLOW HOLES: Cut off 75mm of bandage & force into hole. Wrap bandage very firmly around damaged area extending 50mm beyond either side of repair. Continue to apply pressure to bandage by wetting the outside of the bandage & moulding in direction of the wrap until the bandage begins to set. The bandage hardens in 10 mins & is fully cured within 1 hr.
Available in 2"x60" & 3" x 160" rolls
Bright Silver, prevents further rusting. Description * Bright metallic finish. * Conductive - permits welding. * Protects ferrous metals in hostile environments. * For all touch up and repair jobs. * Resists salt spray. Application Ideal for protection of bare iron and steel fabrications and restoring galvanic protection to galvanised metals following damage. Typically used on agricultural buildings and machinery, guttering, pipework and for protection of chassis and heavy machinery. Directions Shake can well, ensuring the agitator ball is free. All surfaces must be clean and dry - free from rust and grease. Spray lightly from approximately 6-8 inches. For heavy duty use apply several coats. Shake the container occasionally throughout applications. After use invert can and spray briefly to clear the valve.
Cup-Shaped Valved Dust/Mist Respirator
Protection against fine respirable dusts with 3M Cool Flow valve for wearer comfort.
Assigned Protection Factor = 4
Conforms to EN 149:2001 FFP1NR D
Pack of 10
Other sizes or colors may be available on request. Please contact us if you have any queries
Lazer is a unique blend of selected mineral oils, extreme pressure additives, hydrocarbon solvents and PTFE + Teflon intended for a wide variety of applications which may include extremes of temperature or pressure.
Areas of use
Lazer is silicone free and therefore presents no problems when applied to any surfaces to be treated with paints or similar coatings and also contains PTFE giving greater durability than conventional lubricants. Lazer may be used on food and drink production machinery or for more general lubricating duties where other oils fail to give the required performance.
Lazer is effective at temperatures between –40oc up to +350oc, has anti wear and anti corrosion additives, and is resistant to hot, cold and salt water.
Lazer is silicone free, is approved for incidental contact with food and drink and has excellent dielectric properties.
Lazer contains no soaps, salts or metal base gel-ants and will not dry out or harden.
Bulk buy discount may be available. Please contact us if you have any queries.