Bright Silver, prevents further rusting. Description * Bright metallic finish. * Conductive - permits welding. * Protects ferrous metals in hostile environments. * For all touch up and repair jobs. * Resists salt spray. Application Ideal for protection of bare iron and steel fabrications and restoring galvanic protection to galvanised metals following damage. Typically used on agricultural buildings and machinery, guttering, pipework and for protection of chassis and heavy machinery. Directions Shake can well, ensuring the agitator ball is free. All surfaces must be clean and dry - free from rust and grease. Spray lightly from approximately 6-8 inches. For heavy duty use apply several coats. Shake the container occasionally throughout applications. After use invert can and spray briefly to clear the valve.
Highway is a single pack repair system comprising of a bitumen primer and specially graded limestone aggregate coated with bitumen emulsion and solvent, which is compatible with all asphalt, tarmac, or other bitumen based surfaces.
Areas of use
Highway is an easy to use, convenient tarmac or asphalt repair kit, designed as an inexpensive way to maintain areas of drives, paths, car parks, warehouse floors or anywhere damaged or potholed areas present problems. Highway should always be applied in sufficient quantities to fill the hole over and above ground level so that the compound can be compacted or rolled down to an even, level finish.
Highway is packaged in convenient, ready to use quantities and you only use sufficient to effect immediate repair and store remainder in the re-sealable, plastic container, eliminating the necessity to purchase large amounts of tarmac from builders merchants etc.
Ion is an effective combination of cationic surfactants and alcohol solvents which together completely neutralise the build-up of static electricity wherever it may occur
Areas of use
Ion can be used to treat areas where static electricity builds up in addition to being used for the prevention of this problem in areas such as, wrapping, packaging or printing as well as on electronic components e.g. Computer and television screens, videos, audio and gaming equipment. Ion is compatible with all plastics and may be applied with confidence to nylon carpets and soft furnishings to prevent discharges of static electricity.
Ion is non toxic, cfc free and safe on all surfaces. Ion totally eradicates static electricity from production machinery thus promoting trouble free running from the problems normally associated with static electricity.
Other quantities and bulk discount may be available. Please contact us if you have any queries.
A premium nitrile glove, providing good standards of safety for;
High risk chemical handling.
Each glove individually air pressure tested.
Specially designed to provide chemical protection against dangerous organic solvents.
Nearly inert to strong solvents, including aromatics, aliphatic, and chlorinated solvents – which quickly deteriorate natural rubber, neoprene and PVC gloves
Cotton interlock liner adds strength to the glove and improves comfort levels.
Lasts 10-15 times longer than any other coated glove when handling many solvents
Offers good resistance to snags, punctures, abrasions and cuts.
Other sizes or colors may be available on request. Please contact us if you have any queries
Complex Design EN388 Test Result: 4102
Premium quality mineral oil. Lithium thickened lubricating grease suitable for multi-purpose applications. Contains extreme pressure and oxidation resistant additives to reduce wear and improve grease performance to extend component life.
Areas of use
Calibre is packed in sealed cartridges preventing contamination prior to use and fits most standard grease guns and as such may be used on bearings, rams, slide mechanisms and tracks to prevent metal to metal contact thus eliminating wear or break-down
Calibre has high temperature and pressure stability and will withstand temperature from –30oc to +130oc. Calibre is durable and resistant to attack from salt and fresh water and meets the requirements of most major bearing manufacturers specifications.